GCIC Calibration Laboratory's quality system is accredited to ISO 9001-2015, ISO 14001-2015 OHSAS 18001-2007 by Global Accreditation UK,

1.Instrument Calibration

Calibration of all types of instruments for Electrical,Temperature, Pressure, Dimensional, Vacuum, Time, Mass, Electrical, Noise, Airflow, Lux & all Special Purpose Instruments in all ranges are carried out at site as well as at client sites. We are doing calibration for test equipments, process instruments and standards with our calibrated standards.

2.Training Courses

Basic First Aid Training, riggers Qualification certification, fire warden/watch training, welders Qualification certification, operator certification.

GCIC Calibration
we can calibrate all type of more than 1500  different instruments in the various areas like electrical,  pressure, vacuum, thermal, mass, volume, dimension, force, time, etc in all type of ranges and least count. We can do the calibration at client site or in industry camps or client can submit instruments in our laboratory.

Go Bottom

  List of instruments under GCIC calibration scope are listed below

    1. Electrical

Volt meter	Ampere meter	Frequency meter
Resistance meter	Multimeter	Clamp meter
Capacitance meter	Temperature controller	Temperature indicator
Universal calibrator	Calibrator	Electrical Calibrator
AC Volt meter	AC Ampere meter	DC Volt meter
DC Ampere meter	Digital Volt meter	Digital Ampere meter
Decade box	Resistance Decade box	Milli Ohm Meter
kV Meter (if circuit)	mA Meter	mV Meter
PID controller	Thermocouple calibrator	RTD test kit
RTD calibrator	Power meter	Energy Meter
Power factor meter	PF meter	Frequency generator
DC volt source	Power supply	Temperature simulation
Temperature calibrator	Insulation tester	Megger
Digital Insulation tester	Mega Ohm Meter	Earth Tester

    2. Pressure and vacuum

Pressure Gauge	Digital Pressure Gauge	Vacuum gauge
Digital Vacuum Gauge	Pressure Transmitter	Vacuum Transmitter
Pressure Transducer	Vacuum Transducer	Pressure Recorder
Compound gauge	Safety Valve	Pressure Controller
Differential pressure transmitter	I/P converter	P/I converter




  3.Temperature Humidity Mapping

Oven	Incubator	Autoclave
Warehouse	Store room	Dispatch room
Furnaces	Muffle furnace	BOD Incubator
Environmental chamber	Humidity chamber	Humidity
Temperature




  4. Dimensional

Micrometer	Digital Micrometer	Point micrometer
Spline micrometer	Blade micrometer	Ball point micrometer
Vernier caliper	Dial Vernier caliper	Digital vernier caliper
Inside micrometer	Internal micrometer	Depth gauge
Dial depth gauge	Digital depth gauge	Thread plug gauge
Plain plug gauge	Height gauge	Dial height gauge
Digital height gauge	Dial indicator	Digital indicator
Digital dial indicator	Dial indicator of bore gauge	Thickness gauge
Dial thickness gauge	Digital thickness gauge	Ultrasonic thickness
Feeler gauge	Pin gauge	Measuring pin
Pin	Snap Gauge	Dial snap gauge
Gap gauge	I.D. Gauge	Bore Gauge
Dial Calibration tester	Sieve	Test sieve
Angle	Angle Gauge	Angle protector
Bevel protector	Combination set	Degree Protector
Flow Cup	B4 Cup	B6 cup
Glass Scale	Radius gauge	Radius
Thread pitch gauge	Pitch gauge	Standard wire gauge
Wire gauge	Straight edge	Coating thickness gauge
Elcometer	Foils	Profile Projector
Microscope	Measuring Scale	Measuring tape
Steel scale	Scale	Tape
Tape and Scale calibrator	Length bars	Standard length bar




    5.Thermal

Glass Thermometer	Digital Thermometer	Digital Temperature controller with sensor
Digital Temperature indicator with sensor	Temperature Recorder	Temperature Data Logger
Temperature Gauge	Digital Temperature Gauge	RTD sensor
Pt–100 sensor	“J” Type thermocouple	“K” Type thermocouple
COD	Muffle Furnace	Oven
Incubator	Temperature bath	Dry & Wet bulb thermometer
Temperature transmitter	Temperature transducer	Digital Temperature controller with RTD sensor
Digital Temperature indicator with RTD sensor	Liquid temperature bath	Furnace
BOD Incubator	Freeze	Freezer
Deep Freezer




     6. Force and Torque

Shore A Hardness Tester	Shore D Hardness Tester	Durometer
Rubber Hardness tester	Torque wrench	Screw driver
Dial torque wrench	Digital torque wrench

     7. Analytical Instruments

Oven	BOD incubator	Incubator
Weighing balance	Weight box	Weights
COD	Water bath	Freeze
Freezer	Deep Freezer	Autoclave
Oxygen analyzers	Carbon Monoxide Analyzers	Moisture & Dew Point Meter

    8.Power and Energy

Power meter	Energy Meter	Power factor meter
PF meter

    9.Sound

Sound level meter

Sound level calibrator

    10.Laboratory Instruments

Oven	BOD incubator	Incubator
Weighing balance	Weight box	Weights
COD	Water bath	Dial Vernier Caliper
Freezer	Deep Freezer	Autoclave
Microscope	Glass wares	Pipette
Burette	Measuring cylinder	Centrifuge
Micro pipette	Test sieve	Data logger
Thermo–Hygrometer	Humidity controller	Humidity chamber
Vernier caliper	Clinical Instruments

    11.Revolution

Tachometer	Digital Tachometer	Non–Contact tachometer
RPM Meter	Centrifuge	RPM measurement
Speed Measurement	Vibrator RPM	Stroboscope

    12.Volume

Pipette	Micro pipette	Burette
Measuring cylinder	Beaker	Volumetric flask
Glassware’s	Density cup	Pyknometer

    13.Mass

Weights	Weighing balance	Analytical weight box
Weight box

    14.Time

Timer

Hour meter

Stop watch

      15.Special Type Instruments

Holiday detector	COD	Temperature bath
Lux Meter	Illuminanace meter	Pin Hole detector